Initially our client required a 10ft new container, but to keep within their set budget, so we utilised a larger unit and cut this down to the required size of 10ft x 8ft. When the unit was made up, we installed a personnel door with a 10-point locking system to one external wall and a gland plate to another wall.
Our existing client who develop missile systems contacted us regarding a workshop container to carry out site repairs. We not only supply containers to our client, but also visit their sites to carry out alterations and additions to their existing containers. These containers are then sent out to their other sites, for various uses.
DAYS IN TOTAL
Internally, melamine faced lining with insulation was installed to the walls and ceiling and the original marine ply flooring was overlaid with 2.5mm vinyl. Our certified electricians fitted a 5ft non corrosive strip light with five 13amp twin sockets and a 2kw wall mounted convector heater. We also supplied and fitted a melamine worktop. The container was painted dark green before being delivered to site.
The container was going to be shipped to various locations but would remain strapped on the back of a vehicle at all times, for ease of movement. From order to delivery it took just 4 weeks, and our client was extremely happy that we met the budget and deadline, as well as being happy with the overall finish.
Ready to start your container project?
We can help bring your idea to life, just fill in our form and a member of team will be in touch.